Understanding the New SEER 2 Rating and Why It Matters
Energy efficiency is more than just a buzzword; it’s a critical consideration for homeowners keen on saving money and who also want to support environmental sustainability. The launch of new SEER 2 rating standards in 2023 marks a significant shift in how we view cooling efficiency. These changes affect new HVAC installations as well as regular AC maintenance and repairs. Let’s learn more about the nuances of these changes and why they matter to you.
The Basics of SEER and SEER 2
SEER, short for seasonal energy efficiency ratio, is the standard metric utilized to evaluate the cooling efficiency of air conditioning systems. The higher the SEER rating, the more energy efficient the system and the less the operating expenditures. SEER is calculated by dividing the cooling output during a normal cooling season—measured in British thermal units, or BTUs—by the energy consumed in the process as measured in watt-hours. These computations are done under special test conditions to establish consistency.
SEER 2 is the next era of AC efficiency ratings. It applies adjusted testing practices to provide a more accurate representation of real-world performance. Consequently, you can expect that AC efficiency ratings with a “2” after them will be smaller, even though they reflect the same performance.
SEER isn’t the only rating that’s changing in 2023. A comparable cooling rating known as the energy efficiency ratio (EER) is also changing to a new standard called EER 2. Additionally, heat pumps have a heating-related rating that evaluates winter operation. It’s named heating seasonal performance factor (HSPF), which is also changing to HSPF 2 based on new, more stringent testing criteria.
New SEER Rating Standards for 2023
Such changes could make you want to know—what are the new SEER rating standards for 2023? The Department of Energy (DOE) has set different standards for the Northern and Southern United States. Not surprisingly, the South has tighter requirements because this region depends more heavily on air conditioning. Here’s what consumers need to know when shopping for a new AC or heat pump:
- The 2023 minimum rating for air conditioners in Northern states is 14 SEER, which translates to 13.4 SEER 2.
- The 2023 minimum rating for air conditioners in Southern states is 15 SEER, which is equivalent to 14.3 SEER 2.
- The 2023 minimum EER rating only applies to air conditioners installed in Southwestern states. It’s 12.2 EER, which is the same as 11.7 EER 2.
- The 2023 minimum ratings for heat pumps apply nationwide. They are 15 SEER (14.3 SEER 2) and 8.8 HSPF (7.5 HSPF 2).
Why SEER 2 Matters for Homeowners
The change to SEER 2, EER 2 and HSPF 2 is important for several reasons.
The more exact measurements provided by SEER 2-rated units enable homeowners to make informed decisions about new HVAC installations, potentially leading to diminished energy bills over the system’s life span.
Energy-efficient systems with a high SEER 2 rating take significantly less energy. This minimizes your property's carbon footprint, contributing positively to global environmental protection efforts.
Following the latest SEER rating standards and learning about the equivalences between SEER and SEER 2 can help homeowners abide by the latest regulations. Of course, HVAC companies are responsible for installing equipment that satisfies new testing requirements.
In the North, pre-SEER 2 air conditioning systems can still be installed in 2023, so long as they were made before January 1. However, in the South, only SEER 2-compliant air conditioning systems can be installed after January 1. If an installer ignores these regulations and is caught by the DOE, they have to replace the non-compliant AC unit free of cost to the homeowner.
SEER 2 and New HVAC Installations
If you’re looking to purchase a new air conditioning system in 2023, you probably will see SEER or SEER 2 ratings shown on the tag. Either rating may be deemed compliant, if it satisfies the regional minimum.
But bear in mind, it’s vital to note that the new SEER rating standards only apply to systems acquired and installed after January 1, 2023. Any HVAC systems installed earlier than this date don’t need to be replaced if they still perform properly. This exception makes sure homeowners aren’t weighed down by extra expenses but are still able to support future investments in more energy-efficient options.
Embrace SEER 2 with Confidence with Service Experts Heating & Air Conditioning
Appreciating SEER 2 is about more than just grasping a new technical concept. Instead, it’s about aligning your home with the changing landscape of energy efficiency and environmental stewardship. SEER 2 brings a more accurate measurement to the table, influencing the way homeowners plan new HVAC installations.
Service Experts Heating & Air Conditioning is ahead of the curve when it concerns this latest period of heating and cooling efficiency. Our dedication to excellence, professionalism and wallet-friendly financing sets us apart. We even guarantee your 100% satisfaction, so you can move forward with confidence. From teaching homeowners about the new SEER rating standards to providing SEER 2-compliant HVAC installations in Canada, the team at Service Experts Heating & Air Conditioning is here to make your decisions easier.
Reach out to Service Experts Heating & Air Conditioning to find out how we can help you embrace the new SEER rating standards. Together, we’ll help you develop a more energy-efficient home personalized to your needs and aligned with the future of cooling system technology. Call 866-397-3787 today to get your appointment for AC service in Canada.